
Window Well Drainage & Repair in Des Moines
When a low basement window in Sherman Hill or a Beaverdale bungalow starts weeping after a hard spring rain, the source is often not the wall at all. It is the galvanized or concrete window well outside that window, acting like a bucket against the foundation. Window Well Drainage & Repair in Des Moines fixes that overlooked leak source: we clear, re-line, re-drain, and cover the wells so snowmelt and rain run away from the house instead of pooling against the foundation wall. Des Moines sits on dense glacial till clay where the Des Moines and Raccoon rivers meet, and that clay does not absorb water quickly. A well that holds two inches of standing water after a July thunderstorm is pushing hydrostatic pressure straight at your basement wall and window frame. We handle the well, the drain connection, and the grading around it so the fix holds through freeze-thaw. If the water has already found its way inside, start with a basement waterproofing assessment before you spend money on the wrong repair.
Why Window Wells Fail on Des Moines' Older Foundation Stock
Most window well failures we see in Des Moines are not the window's fault. They are the well's. The 1880s to 1940s brick and frame homes in Drake, Waterbury, and Salisbury Oaks were built with shallow wells and clay footing drains that have long since collapsed or silted shut. The 1950s to 1970s ranches across Merle Hay and Windsor Heights often have rusted steel wells with no drain at all, just a gravel bottom that clogs with fine glacial clay. When that well fills, water sits against the foundation and finds the window frame, the block mortar joint, or the tie-rod hole.
- Wells with no drain or a clogged drain fill during every heavy spring rain and dump water against the foundation.
- Rusted steel wells in 1950s and 1960s ranches develop holes that let soil and clay wash into the well.
- Wells set too low on a slope collect runoff from the yard before the footing drain can take it.
- Missing or broken covers let snowmelt, leaves, and roof runoff fill the well through the winter and spring thaw.
- Wells backfilled with clay soil hold water against the wall instead of releasing it to the footing drain.
Each of these problems sends water to the same place: the base of your basement wall, where the pressure builds and the seepage starts.
Key info: A window well on a 1920s bungalow in Beaverdale with a clay bottom and no drain will hold water for days after a storm. The basement window frame and the block wall below it take that pressure first, which is why homeowners often blame the window when the well is the real source.
Before you authorize any repair, check what your local building department requires. Drainage alterations and any work that changes how water discharges from the property are commonly permitted, and the rules vary by jurisdiction. Start with the City of Des Moines permits and licenses office to confirm what applies to your address.
How We Repair and Re-Drain a Window Well in Des Moines
We do not just scoop out the debris and call it done. The well has to move water somewhere, and in Des Moines that means tying it into a working drain that reaches the footing drain or a sump basin. We start by inspecting the well from the inside and the grade around it, then trace where the water actually goes. On the older homes, that often means finding a footing drain that has not worked since the 1970s.
- We pump out and clear the well, then dig down to expose the drain connection and the foundation wall behind the well.
- We inspect the well walls for rust holes, cracked concrete, or separation from the foundation and repair or replace the well shell as needed.
- We install or re-route the well drain to the footing drain or to a sump basin, using perforated pipe bedded in gravel and wrapped in filter fabric so glacial clay cannot clog it.
- We backfill with clean gravel, not the clay soil we removed, and restore the grade so surface water sheds away from the well.
- We fit a clear or solid polycarbonate cover sized to the well, and we check that the cover sheds snowmelt and rain away from the window rather than into the well.
If the drain ties into a sump basin, we confirm the pump can handle the added volume, and we recommend a battery backup sump pump for the spring storms that knock out power across the metro.
Key info: On a 1962 split-level in Urbandale, the well on the north side had a rusted steel shell and no drain. We replaced the shell, ran a new perforated drain to the existing sump basin, and added a cover. The basement window that had leaked every March stayed dry through the next spring thaw.
For wells that sit low on a slope or collect runoff from a large roof area, a French drain installation uphill of the well may be the better long-term answer than a larger well drain alone.
Window Well Repair Methods We Use in Des Moines
Not every well needs the same fix. A rusted steel well on a 1950s ranch in Johnston is a different job from a shallow concrete well on a 1910 frame house in Sherman Hill. Here is how we match the method to the problem.
| Approach | Description | Best for |
|---|---|---|
| Drain clearing and re-bedding | We clear the existing drain, re-bed it in clean gravel and filter fabric, and restore the grade around the well. | Wells with an intact shell and a clogged drain on older Des Moines homes. |
| New drain to footing drain or sump | We install a new perforated drain line from the well to the footing drain or sump basin when no working drain exists. | 1950s to 1970s ranches with steel wells and no drain, common in Windsor Heights and Urbandale. |
| Well shell replacement | We remove a rusted or cracked well and set a new galvanized or composite shell with a proper drain connection. | Wells with rust holes, cracked concrete, or separation from the foundation wall. |
| Cover and grade correction | We fit a polycarbonate cover and regrade the surrounding soil so surface water sheds away from the well. | Wells that fill with snowmelt and roof runoff, especially on the north side of the house. |
| Tie-in to interior drain tile | When the footing drain is gone, we connect the well drain to a new interior drain tile system and sump basin. | Older homes with failed clay footing drains and recurring basement seepage. |
The right method depends on what we find when we open the well, which is why we look before we quote.
Window Well Drainage & Repair Cost in Des Moines: What to Expect
Most window well drainage and repair work in Des Moines starts at From $650 for a single well with a clearable drain and a cover. That figure covers the common case: clearing the well, re-bedding the drain in gravel, restoring the grade, and fitting a cover. The price moves up from there based on what we find once the well is open.
- Well depth and access matter, since a deep well on a sloping lot in Pleasant Hill takes more excavation and more gravel.
- Shell condition drives cost, because a rusted steel well that needs full replacement is a bigger job than a drain clearing.
- Distance to the footing drain or sump basin changes the pipe run and the labor.
- Multiple wells on the same house are usually priced together at a lower per-well rate than a single well.
- If the footing drain is failed and the well drain has to tie into new interior drain tile, the scope grows and we price it as a combined job.
Get two or three estimates and ask each contractor to explain what they found in the well and why they recommend the method they quoted. A quote that does not mention the drain connection is a red flag. You can see how we structure pricing on our pricing page.
Window Well Drainage & Repair Near Me: Hiring a Contractor Near Des Moines
Window well work is below-grade work, and it should be done by a contractor who specializes in basement waterproofing and drainage, not a general handyman. Here is what to check before you sign.
- Confirm the contractor is licensed and insured, and ask for a certificate of insurance before work starts.
- Get at least two or three written estimates and compare the scope, not just the bottom line.
- Ask for references from jobs in your part of the metro, whether that is Ankeny, Grimes, or the older neighborhoods near downtown.
- Ask who pulls the permit if drainage work requires one, and confirm the local building department's rules for your address.
- Check HOA requirements if you live in a newer subdivision in Waukee or West Des Moines, since some associations restrict exterior changes.
We are a Basement Health Association member and we work below grade only. If you want a straight answer on whether your well needs a drain clearing or a full replacement, contact us for a free estimate.
When the Well Is Only Half the Problem
A window well that fills is often the first sign that the footing drain has failed or that the water table is pushing against the foundation. If you see efflorescence on the block wall below the window, or a musty smell in the basement after rain, the well repair alone will not solve it. In those cases we look at the whole system: the well drain, the footing drain, the sump basin, and the wall itself. That may mean a foundation crack repair with epoxy or polyurethane injection if the water has found a crack, or a drain tile repair if the old clay tile has collapsed. We tell you plainly when a simple well repair is enough and when the real problem is hydrostatic pressure that needs a bigger fix.
Window Well Drainage & Repair in Des Moines: Pricing Guide
| Service | Price | Details |
|---|---|---|
| Single well drain clearing and cover | Starting at $650 | Includes clearing the well, re-bedding the drain in gravel, regrading, and fitting a cover. |
| New drain to footing drain or sump | Starting at $950 | Adds a new perforated drain line when no working drain exists at the well. |
| Well shell replacement | Starting at $1,400 | Removes a rusted or cracked well and sets a new shell with a proper drain connection. |
| Multiple wells on one house | On estimate | Priced per well at a lower rate; scope depends on depth, access, and drain routing. |
| Combined well and interior drain tile | On estimate | Needs an on-site look when the footing drain is failed and the well ties into new interior drain tile. |
| Estimate | Free | Response within 24h at (515) 834-4110, no obligation to book. |
Indicative pricing, the exact cost depends on square footage, finish, and site access. Free personalized estimate within 24h at (515) 834-4110.